Pura QCRO4V-50 Spezifikationen PDF herunterladen (Seite 26)

24

1. Turn off incoming water supply

to RO.

2. Open RO Faucet and allow water

to drain from the tank until it is

completely empty.

3. Check that air pressure is between

5-7 psi using an air pressure gauge.

4. If the pressure is low use a bicycle

pump to increase pressure to 5-7 psi.

5. Follow startup procedure.

1. Turn off incoming water supply

to RO.

2. Open RO Faucet and allow water

to drain from the tank until it is

completely empty.

3. Check that air pressure is between

5-7 psi using an air pressure gauge.

4. If the pressure is low use a bicycle

pump to increase pressure to 5-7 psi.

5. Follow startup procedure.

Metal Tank Sanitization Procedure

Plastic Tank Sanitization Procedure

1. Turn off water supply to your RO

system by turning off the adapter

valve. Open the faucet to drain the

storage tank.

2. Once the tank has emptied. Discon-

nect the tube from the ball valve on

the storage tank.

1. Turn off water supply to your RO

system by turning off the adapter

valve. Open the faucet to drain the

storage tank.

2. Once the tank has emptied. Discon-

nect the tube from the ball valve on

the storage tank.

3. Using a clean eye dropper insert 1/2

teaspoon of hydrogen peroxide or

common household bleach into the

tube.

4. Reconnect the tube to the ball

valve. Follow the start up procedure

and drain the first two full tanks of

water.

3. Using a clean eye dropper insert 1/2

teaspoon of hydrogen peroxide or

common household bleach into the

tube.

4. Reconnect the tube to the ball

valve. Follow the start up procedure

and drain the first two full tanks of

water.

Tank Pressure Check

Tank Pressure Check

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare